5. Select <registration> at the bottom of the Pop-up menu.
6. Select Server Address and press 1407.
7. Input and press enter in the on-screen keyboard.
8. Go to Registration Key and input 25digit key, and press enter in the on-screen keyboard.
9. Status: "Connecting > Conneted to the server / expire date" will be shown.
10. Go to the live channel (pls. refer to the channel list)
The key is safe even after factory reset, and one 25digit key can be used in only one PVR.

7. Mgcamd: Mgcamd is a separated solution.
C/S information for Mgcamd should be editted and input into plugin > keys > newcamd.
In the newcamd file, you can see the examples for how to input C/S information.

------------------------

<Home Network Sharing>
You can use Home Network Sharing from this plugin with Mcas and Mclient.
Both Server and Client receiver need to be connected by internet.
Server receiver and client receiver have to have the same Gate way address to share card key data within Home Network.

Mcas - server side
1. make started by Green button and then press OK button
2. you will see &iexcl;®smart card 2&iexcl;¯ and &iexcl;®server setting&iexcl;¯ menu if your receiver has smart card inside
3. enter &iexcl;®server setting&iexcl;¯ menu by press OK
4.&iexcl;®port&iexcl;¯ : don&iexcl;¯t need to change port and it is better to leave as default, but you can change it as 5 digits if you need and it is safe.
5.&iexcl;®user setting&iexcl;¯ : you can input user id and password to allow connecting to server receiver from client which is listed inside user setting menu.
6.&iexcl;®auto start&iexcl;¯ : you can change as &iexcl;®on&iexcl;¯ if you want to start this server menu when you start Mcas plugin
7. login confirmation : you can change as &iexcl;®on&iexcl;¯ if you want to check user id and password from client receiver

Mclient - client side
1. make started by Green button and then press OK button
2. there is a input space for server address (IP address of server receiver), port, user id, password
3. To edit server address, you need to press your own master key (1407 if there is no change) then input the IP address of server receiver (no need //)
4. lastly, go to the &iexcl;®connect to server&iexcl;¯ and press &iexcl;®OK&iexcl;¯ button