صدر قبل ايام النسخة الثانية من الصورة التشغيلية المطورة عن الرسمية للفريق الجديد UFM وهو التطوير للنسخة الرسمية رقم ( 10427 ) ..

::: وابرز التعديلات والتغيرات في هذه الاصدارة :::



كود:
What is it? This is a modified firmware from the official DGS, 
which, however, the closest alternative to the firmware to 
the official. When modifying the following approach:
minimal invasion of the "factory" code, a minimum of additional
startuemyh ******s and services, only the most necessary. 
From this point of view, the most famous alternative firmware 
(SifTeam and NLB), there are some bad things. Not going into 
jungle, suffice it to say that ******s run in softkamov SifTeam 
realized baldly, and in some places and quite wrong. 
In the NLB (which is not illicit initial developer, a beginner, 
do not seem to quite know what the), there are lots of 
unnecessary cumbersome, which can solve one or two teams 
in the Telnet. In short, the firmware 'UFM' solves the problem 
of minimal invasion of the receiver, while adding interesting 
opportunities for those who need them.

For minimalism have to pay so that you will not have a "control panel
softkamom or access to the receiver on the SSH and all other" types 
of luxury goods "(which every year is used in the initial setup, and then
hangs unnecessary goods). If you want to change skin color or reassign
action buttons, you have to give a couple-three teams in the Telnet. 
So I just want to say to those who expect that the firmware will "steepen"
the other (otherwise why would it do?): "Will not be steeper." 
More precisely, will be, but not for all. Because each person their ideas
about how it is "cooler". This firmware - one. If you like the fact that 
the receiver's two (!) Web server, SSH, FTP, Telnet servers,
SoftKey, software for the card reader, etc., etc., and it works by
default, and at the same time - take courage LNB. If you like klatsane
colored buttons in the toolbar SifTeam, and as a result you get a left
foot prikruchennye ******s and iskromsannye official ******s - take
SifTeam. If you need a minimum "set of gentlemen", implemented
correctly, and you're not afraid to give another team-from the 
command line, you will here.

In UFM firmware updated just a couple of lines in the native ******.
Everything else is sitting and waiting in the wings (if you want to 
use them).

The difference from the official firmware (the language of ordinary users)

- Added sofkamy / emulators mgcamd v1.31, incubusCamd v0.90, mbox v0.6 
  build 10 with the opportunity to autostart one when running
- Is it possible to switch between different softkamami "on the fly" on a 
  color button
- All ******uration files softkamov is still in / var / keys (any key is not there
- only the sample files)
- Added option to install alternative skins in the folder / var / skins (there 
  is no additional skins, works correctly with this version of software)
- Added the ability to toggle between screen cyclically 4:3 / 16:9 / 14:9 
  for the colored button (mode is not saved when switching channels)
- Updated version of the plugin and added a plugin FavPIP ****** (to run 
  their ******s from / var / bin)
- Updated data**** transponders (10.08.2009) all satellites from 4W up 
  to 40E, inclusive, plus 53E, 75E, 80E, 90E
- Updated web interface DGS to the latest version 1.3.8
- Service is disabled by default Samba (used to see the *******s of 
  receiver via Windows Sharing)

The difference from the official firmware (the language is closer to linuksoidnomu)

- Подчищена midden in the folder / var
- In / var / bin there are all the binaries softkamov: mgcamd, 
  incubusCamd.sh4, mbox.sh40
- In / var / bin ******s are nextcam.sh and softcam for managing softkamami
- In / var / bin is a ****** nextzoom.sh to switch between screen
- In / var / bin / init.d ****** is 3.softcam.start for auto softkama at startup. 
  See the README file there.
- In / var / etc ******uration files are my.softcam (the name chosen
  softkama) and my.softcams (list softkamov for cyclic switching 
  between them)
- In / var / etc is the ******uration file my.skin, which contains the name 
  of the skin of the / var / skins
- In / var / etc is the ******uration file my.zooms, which contains a list 
  of the screen to switch between the two cyclic
- In / var / etc file softcam.enabled or softcam.disabled, which affects 
  the Softkey will run at startup or not the receiver
- In / var / etc file smb.disabled or smb.enabled, which affects the 
  Samba service will be launched at startup or not
- Added binary tcpdump in / usr / bin - network packet sniffer, for those 
  who need (taken from the depths of the Internet)
- Cosmetics: change UID = 502, GID = 502 in / etc / passwd and / etc /
  group for the user and group "relook" (all files in the receiver with
  ID = 502, but no such user)
- Modified the ****** / etc / init.d / sbox to support skin change (using 
  the file / var / etc / my.skin) and to respond to the file / var / etc / smb.     
  [Enabled | disabled]
- / Etc / profile was moved to / var / etc / profile by using the character 
  links, so that you can freely edit this file
- / Usr / share / sbox / image (where the skin) diverted through the 
  character link to the / var / skins
- / Usr / share / sbox / image / cool (from the skin DGS) is now stored
  in / usr / share / sbox / skins / cool, and it shows the character Link
  from the / var / skins / cool

After installing the firmware is already ******ured autostart softkama
mgcamd. You will need to just put your ******uration files in / var /
keys, as before.

Username / password for Telnet and FTP: root / relook

Username / password for the Web interface: relook / relook

::: طريقة التركيب :::

عبر برنامج Flash Tools أو عبر الفلاش ميموري الخارجي ..



::: UFM image IPBOX.9000.10427 build.001