محترفي السات الأردني - Powered by vBulletin

banner
صفحة 1 من 5 12345 الأخيرةالأخيرة
النتائج 1 إلى 10 من 43
  1. #1
    الصورة الرمزية ghamdan
    تاريخ التسجيل : Mar 2006
    رقم العضوية: 1
    المشاركات : 3,876

    افتراضي لادخال المفاتيح وتفعيل التشقير للرسيفرات والكامات

    Sky X, Sky X5.
    * * After Power Failure Press 6969 + 6969 (This option also open scramble channel).
    * * Press 8280 to insert manually BISS keys.
    * * Press 8282 to insert KEYS manually (Seca, Viaccess, Irdeto, Nagravision, Conax).
    * * Press 8282 ->Press Blue Button on Remote, New window will appear on the screen.

    This Option will allow you to watch some of TPS package while the others no,
    (This is very usefull when TPS were Black-Out),
    Do this:
    Point to a scramble channel eg: France 2 -> press 8282 ->Press Blue Button ->Move up/down ->Point to ID 007800 or 007c000 or 015000 or 021100 or What ever ID works with then press OK ->YES -> OK to save ->Exit.
    At this time France 2 should work again on your TV.
    Do as above to the others channel.

    (Regarding to this option SOON WILL BE RELEASE more info on ID's).


    Humax. (5400 / 5400z)
    * * After downloading the new firmware still some channel are scramble,
    Do this:
    Switch ON The Receiver ->Remove Card ->Remove Cas ->Point to Scramble Channel
    (eg: SRG) -> Download the Bin Key File with the latest SRG keys -> Switch OFF ->
    Insert Cas -> Insert Card ->Switch ON.
    And now SRG channel should be OK.


    Fortecstar.
    If you can't get to the Menu Screen, Do this: Turn Off & On The Receiver from the Back.
    Just after the ---- Click on Menu. The menu should be appear again on your tv screen.

    How To Enter The Keys For Lifetime Ultra.
    * * Click MENU on the remote
    * * Then Right Arrow to CHANNEL EDIT
    * * Then Arrow down to CODE then OK then 1668 or 1010 what ever works.
    * * Then Right Arrow to turn code OFF just to be safe.
    * * Then Arrow down to eg: NAGRAVISION then OK
    * * Then side Arrow to eg: DISH NETWORK
    * * You need to change the keys on Two Lines.
    * * In PROVIDER ID it will be 00 01 so you do NOT need to change this line.
    * * Then Down Arrow to KEY NUMBER change here 00 or 01
    * * Then Down Arrow again to KEY, change here XX XX XX XX XX XX XX XX
    * * Then OK to Save. Then EXIT Once
    * * Then Right Arrow Once, then enter 1668 to turn code back ON.
    Make sure your KEYCODE FUNCTION is ON.
    Your TV should work now after you Exit Out.

    If your TV don't work after the above this mean you have another problems.
    Make sure the Dish Cable on your Receiver is at the IF Connector NOT the ANT.
    There are Two Kinds of Remote's that I know of.
    Here is where the letters are on both remote's.
    * A - SAT
    * B - INFO or i
    * C - TV/RADIO
    * D - PAUSE
    * E - AUDIO or ?
    * F - GUIDE or EPG

    If the keys will not stay or come out reversed, Do this: Put the keys in again, and
    How To Set The Default Key
    Click on MENU then go to CHANNEL EDIT then CODE then OK
    Put in 1010 or 1668 what ever it works, then down Arrow to SET DEFAULT KEY and click OK then Exit Out.

    Re: HOW to check original firmware on KAON (230) Receiver

    --------------------------------------------------------------------------------

    Check original firm on Kaon 230
    Go to keys menu press yellow, blue, green, menu and then yellow to initialize the keys.
    If it's yellow this mean you still have the original firmware !
    SRT3620 & 3630

    To Edit the code key press the number 8282.
    Enter the code 6969 two times each time coming from main power OFF/ON and the unit will open the scrambled channels.

    TO EDIT PROVIDER ID OR ADD NEW KEY
    PRESS MENU GO TO INSTALLATION/INFORMATION then
    PRESS "FUNC"KEY 4 TIMES.

    TO RESET OR INITIALIZE THE KEY CODE OF
    PRESS "MENU" then
    GO TO "SYSTEM INFORMATION"
    PRESS "FUNC" KEY 4 TIMES then
    PRESS "0"

    التوقيع

    لا اله الا الله الحليم الكريم لا اله الا الله العلى العظيم
    لا اله الا الله رب السموات السبع ورب العرش العظيم
    لا إله إلا الله عدد ما كان ، وعدد ما يكون ، وعدد الحركات والسكنات)

  2. #2
    مدير سابق
    الصورة الرمزية ghamdan

    تاريخ التسجيل : Mar 2006
    رقم العضوية: 1
    المشاركات : 3,876
    المعدل اليومي: 0.59
    ghamdan غير متصل

    افتراضي


    How to enter new key to DragonCam (by remote control)
    1. Find the key (eg: A9 04 F4 FF A3 AF FA 5B 5C A7 51 BF 5A 35 D0 C0)

    2). Transform it into Dragon recognazible numbers:

    08-0 : 169 004 244 255 163 175 250 091
    08-1 : 092 167 081 191 090 053 208 192

    3). Open DragonCAM menu... enter debug.. enter Viaccess ... enter Viaccess1

    4). Find provider 55AEAE (default first)

    5). Enter it and change the 08x-09x key

    6). When asked for 08-0 enter 169 004 244 255 163 175 250 091

    7). When asked for 08-1 enter 092 167 081 191 090 053 208 192

    That's it.. you're ready for MultiVision... HAVE FUN!!!!!!

    How To Enter Tps Aes Key To Humax5400z

    Tps Aes Key (for example recent aes key-26-11-2005):
    ED 40 3D 80 75 A7 1D 91 0E 59 89 7B 2B B4 DC 63

    Goto
    1-menu
    2-toh--right Button
    3-parser
    4-ram Editor
    5-GREEN Button For Viaccess
    6-down Button For Going To Provider Line
    7-use Right Button Find 007c000 Tps Provider
    8-go To 03 Key Line With Down Button
    9-enter First 8x2 Key From Tps Aes Key Like This
    03: ED 40 3D 80 75 A7 1D 91
    To Do This
    Use Number Buttons 0-9
    Mute Button = A
    Red Button = B
    Green Button = C
    Yellow Button = D
    Blue Button = E
    White Button = F
    You Can Also Use Up Down Buttons To Change The Keys
    Enter This To 03 Key Line ED 40 3D 80 75 A7 1D 91
    10-then Go To Key Line 13 With Right Button
    11-enter Second 8x2 Key This 0E 59 89 7B 2B B4 DC 63
    That it Your Tps Aes Key Will Be Updated,
    Good luck!!

    التوقيع

    لا اله الا الله الحليم الكريم لا اله الا الله العلى العظيم
    لا اله الا الله رب السموات السبع ورب العرش العظيم
    لا إله إلا الله عدد ما كان ، وعدد ما يكون ، وعدد الحركات والسكنات)

  3. #3
    مدير سابق
    الصورة الرمزية ghamdan

    تاريخ التسجيل : Mar 2006
    رقم العضوية: 1
    المشاركات : 3,876
    المعدل اليومي: 0.59
    ghamdan غير متصل

    افتراضي


    how to enter keys in manhatten patched recievers
    -------------------------------------------------
    on remote press menu,
    then-red-green-yellow-blue-ok.
    the hidden menu will open.
    with the blue button you change the cas settings
    ie:irdeto-seca-via-nagra.you set to the system for the keys.
    ----------------------------------------------------------
    for nagra you will see,this board.
    **** ** ****************
    **** ** ****************
    you enter the ident followed by the keys.

    ie: 3d01-- 00-- fa-1e-93-35-3a-a8-1f-4a
    3d01-- 01-- 30-9b-96-0b-a7-55-39-f4
    after you enter the keys use the green button to store
    then exit the menu and the chns:will open
    use this method for all systems,you find the ident with the keys.
    the other systems use the ident with one row of keys.
    this will give
    Upgrading Dragon cam with Dragon PC Loader

    1. First of all start the Dragon PC Loader 3.3 (DRCP Loader).
    2. Then "Open" button select any Predator file. Or with "download" button you can download automaticaly from internet.
    3. Be sure your reciever is on a FTA channel.
    4. Insert Dragon PC Loader card into Dragon cam (Contact or chip to be UP). connect commport to Dragon PC Loader with serial lead 1:1 and Cam together with loader insert to receiver.
    5. After this go to conditional access of reciever and select predator x.xx "dragon loader" and press ok.
    6. Select "Yes load module" and wait utill upgrade finish.
    7. Remove card and restart your receiver (off and on).

    التوقيع

    لا اله الا الله الحليم الكريم لا اله الا الله العلى العظيم
    لا اله الا الله رب السموات السبع ورب العرش العظيم
    لا إله إلا الله عدد ما كان ، وعدد ما يكون ، وعدد الحركات والسكنات)

  4. #4
    مدير سابق
    الصورة الرمزية ghamdan

    تاريخ التسجيل : Mar 2006
    رقم العضوية: 1
    المشاركات : 3,876
    المعدل اليومي: 0.59
    ghamdan غير متصل

    افتراضي


    How to enter new AES for STRONG & SKY :

    1-Hit 8282 by Remote

    2-In Ident 007C00
    01: C9 19 A9 E7 41 4D 2F B8
    11: 1E 51 87 7C 07 02 47 9A

    3-Exit-Save.

    4-Power OFF and ON Your Reciever (IT'S A MUST)

    5-Hit 6969 Twice
    How to enter the key in Kaon receiver

    * First
    Disconnect the receiver from the power supply at least for 1 (one) minute,
    Then Reconnect to the power supply again,
    * Then
    When picture appears on screen,
    Press Yellow, Blue, Green, and Menu button
    *Remember
    You have to do it quickly, don't leave an interval between pressing each button.

    After that the key list will open
    and you can change the keys by pressing volume button left & right.

    التوقيع

    لا اله الا الله الحليم الكريم لا اله الا الله العلى العظيم
    لا اله الا الله رب السموات السبع ورب العرش العظيم
    لا إله إلا الله عدد ما كان ، وعدد ما يكون ، وعدد الحركات والسكنات)

  5. #5
    مدير سابق
    الصورة الرمزية ghamdan

    تاريخ التسجيل : Mar 2006
    رقم العضوية: 1
    المشاركات : 3,876
    المعدل اليومي: 0.59
    ghamdan غير متصل

    افتراضي


    HOW To Actived Receiver Code MENU

    **TECNOSAT 2000 ULTRA

    Press MENU then Press 5400

    **SUPERMAX 9100

    Press MENU then Press 7799
    --------------------------------------------------------------------------------

    STARSAT
    How To Backup Channels
    Before you uploaded the update, do the following to save your channel list

    Press MENU
    Go to SETUP
    Go to SYSTEM BACKUP
    now upload the new software

    After booting, if asked, choose the language, and
    Go to MENU
    Go to SETUP
    Go to SYSTEM RESTORE
    Your list of channels will be restored as it was.

    التوقيع

    لا اله الا الله الحليم الكريم لا اله الا الله العلى العظيم
    لا اله الا الله رب السموات السبع ورب العرش العظيم
    لا إله إلا الله عدد ما كان ، وعدد ما يكون ، وعدد الحركات والسكنات)

  6. #6
    مدير سابق
    الصورة الرمزية ghamdan

    تاريخ التسجيل : Mar 2006
    رقم العضوية: 1
    المشاركات : 3,876
    المعدل اليومي: 0.59
    ghamdan غير متصل

    افتراضي


    How to enter Biss Key for SKY X Receiver:
    1).Open the NBA channel
    2).Press 8280
    3).Enter this numbers in Row No.1 :18AA0000C2D328BD
    4).Exit & Save.
    For others channel enter the Biss Keys in ROW 2 and so on.
    eg:
    Row No.1 18 AA 00 00 C2 D3 28 BD 00 00 00 00 00 00 00 00 => NBA (16 Digit)
    Row No.2 AB CD EF 67 FE DC BA 94 00 00 00 00 00 00 00 00 => Megasport (16 Digit)
    Row No.3
    |
    |
    Row No.20
    www.jo1sat.com

    التوقيع

    لا اله الا الله الحليم الكريم لا اله الا الله العلى العظيم
    لا اله الا الله رب السموات السبع ورب العرش العظيم
    لا إله إلا الله عدد ما كان ، وعدد ما يكون ، وعدد الحركات والسكنات)

  7. #7
    مدير سابق
    الصورة الرمزية ghamdan

    تاريخ التسجيل : Mar 2006
    رقم العضوية: 1
    المشاركات : 3,876
    المعدل اليومي: 0.59
    ghamdan غير متصل

    افتراضي


    samrt ace 1000تفعيل كودات التشفير

    --------------------------------------------------------------------------------

    menue
    9317
    تظهر الكودات

    التوقيع

    لا اله الا الله الحليم الكريم لا اله الا الله العلى العظيم
    لا اله الا الله رب السموات السبع ورب العرش العظيم
    لا إله إلا الله عدد ما كان ، وعدد ما يكون ، وعدد الحركات والسكنات)

  8. #8
    مدير سابق
    الصورة الرمزية ghamdan

    تاريخ التسجيل : Mar 2006
    رقم العضوية: 1
    المشاركات : 3,876
    المعدل اليومي: 0.59
    ghamdan غير متصل

    افتراضي


    الاوبن ستار


    يفية تفعيل فتح القنوات بعد تنزيل السوفتوير, طريقة التفعيل خطوة
    خطوة !لجميع الموديلا

    --------------------------------------------------------------------------------

    السلام عليكم..


    بعد تنزيل السوفتوير لجهاز الاوبن ستار موديل GS-1690 يلزمك ادخال رقمين لتفعيل ميزة الفتح بالرسيفر.. وهي كالتالي:

    ضع على اي قناة مشفرة, وعند ظهور كلمة Scrambled Channels قم بالضغط على:

    EXIT>> 6108
    سينطفئ الجهاز ويعمل مرة أخرى, وعندها أيضا سوف تظهر لك كلمة Scrambled Channels , وعندها أدخل:

    EXIT>> 8088

    وبعدها سينطفئ الجهاز ويعمل مرة أخرى. وعندها ستفتح كل القنوات, وستظهر لك قائمة تعديل الكودات (EDIT CODE)

    أما بالنسبه لطريقة تفعيل اجهزة ال 7000 وال 1990 (+) ,, فهي كالتالي :

    طريقة التفعيل :
    تأكد من تنزيل السوفتوير بشكل صحيح ..
    لتفعيل القنوات ...
    لأول مره فقط ..
    اذهب الى القائمة وأدخل الرقم 8888
    ثم اضغط على القائمه مره اخرى ,, واضغط على الكبسه الزرقاء في الرموت لكي تظهر لك صفحة الكودات ..
    ومن ثم
    menu,press "5-7-9-6" والانتظار على القناة 1 دقيقه بس !!

    لالغاء خاصيه فتح القنوات المشفره ..
    كرر نفس العمليه لكن بوضع 0000 ... وحينها سوف يتوقف الجهاز عن تفعيل ومشاهدة القنوات المشفره !!


    Please make sure model no is correct before upgrade

    Please use this version to upgrade which fix multivision problem.

    connect the receiver and computer with RS232 straight calbe
    double clcik to open "stbv2"
    from menu to click open file icon, open the file:v??.cus
    turn on the receiver, it will start to fuse software into flash memory
    wait untill receiver reboot


    For new receiver after upgrade, Please operate from remote as follows:
    Press MENU button,then press 8888

    Press MENU button, BLUE button



    Close this function, Please operate from remote as follows:

    Press MENU button,then press 0000

    التوقيع

    لا اله الا الله الحليم الكريم لا اله الا الله العلى العظيم
    لا اله الا الله رب السموات السبع ورب العرش العظيم
    لا إله إلا الله عدد ما كان ، وعدد ما يكون ، وعدد الحركات والسكنات)

  9. #9
    مدير سابق
    الصورة الرمزية ghamdan

    تاريخ التسجيل : Mar 2006
    رقم العضوية: 1
    المشاركات : 3,876
    المعدل اليومي: 0.59
    ghamdan غير متصل

    افتراضي


    الارقاام السرية لاسطرفوكس و مكرواكس

    --------------------------------------------------------------------------------

    ASTROVOX AND MIRCO-X MASTER CODES AND CODE ACTIVATION

    MDR-4000 FTA
    Master Password>>>>>>1250
    Code Activation >>>>>>>>>>Automatically after loading the S/W.

    VSR-2500 FTA
    Master Password>>>>>>1250
    Code Activation >>>>>>>>>>Automatically after loading the S/W.

    VSR-2600 FTA PLUS
    Master Password>>>>>>1004
    Code Activation >>>>Menu – Language Setting – Ok – Red Button followed by "9999" – Go and enable Emulation – Red Button to save.

    MDR-2800 FTA
    Master Password>>>>>>1004
    Code Activation >>>>Menu – Language Setting – Ok – Red Button followed by "8888" – Go and enable Emulation – Red Button to save.

    MDR-6000 IR
    Master Password>>>>>>1004
    Code Activation >>>>Menu – Language Setting – Ok – Red Button followed by "8888" – Go and enable Emulation – Red Button to save.

    MDR-6500 IRCI
    Master Password>>>>>>1004
    Code Activation >>>>Menu – Language Setting – Ok – Red Button followed by "8888" – Go and enable Emulation – Red Button to save.

    VSR-250 FTA
    Master Password>>>>>>RELOAD S/W
    Code Activation >>>>Blue button followed by "0000"on any channel.

    MDR-4500 FTA
    Master Password>>>>>>8175
    Code Activation >>>>Menu – Parental Control – Enter 3453 then press Menu to exit.

    VSR-2600 FTA
    Master Password>>>>>>1668
    Code Activation >>>>Menu – Parental Control – Second Pin Enter 1668 – Switch On.

    VSR-3000 CI
    Master Password>>>>>>1250
    Code Activation >>>>Automatically after loading the S/W..

    VSR-4550 MR
    Master Password>>>>>>1668
    Code Activation >>>>Automatically after loading the Matrix S/W.

    VSR-4500 2CI
    Master Password>>>>>>1668
    Code Activation >>>>Automatically after loading the Penta S/W.

    VSR-4600 2CI
    Master Password>>>>>>1668
    Code Activation >>>>Automatically after loading the Matrix S/W.

    VSR-7000 CX
    Master Password>>>>>>1668
    Code Activation >>>>Automatically after loading the S/W..

    التوقيع

    لا اله الا الله الحليم الكريم لا اله الا الله العلى العظيم
    لا اله الا الله رب السموات السبع ورب العرش العظيم
    لا إله إلا الله عدد ما كان ، وعدد ما يكون ، وعدد الحركات والسكنات)

  10. #10
    مدير سابق
    الصورة الرمزية ghamdan

    تاريخ التسجيل : Mar 2006
    رقم العضوية: 1
    المشاركات : 3,876
    المعدل اليومي: 0.59
    ghamdan غير متصل

    افتراضي


    beausat 6310
    وهذه هى طريقه تفعيل الشفره

    بعد تحميل السوفت
    اقف على اللغه و اكتب 2003
    ثم سهم يمين و اضغط على الزر الاصفر ثم ok

    التوقيع

    لا اله الا الله الحليم الكريم لا اله الا الله العلى العظيم
    لا اله الا الله رب السموات السبع ورب العرش العظيم
    لا إله إلا الله عدد ما كان ، وعدد ما يكون ، وعدد الحركات والسكنات)

صفحة 1 من 5 12345 الأخيرةالأخيرة

المواضيع المتشابهه

  1. ثلاث برامج لادخال المفاتيح واخر لادخال ملف التعريف عربى
    بواسطة خالدمزيد في المنتدى المواضيع المهمة للهيوماكس
    مشاركات: 30
    آخر مشاركة: 15-07-2012, 12:46 AM
  2. متابعيي المفاتيح هذه احدث المفاتيح / usb
    بواسطة aljwal في المنتدى منتدى اللورنس Lawrence
    مشاركات: 3
    آخر مشاركة: 25-03-2011, 07:14 PM
  3. مشاركات: 1
    آخر مشاركة: 25-03-2011, 04:14 PM
  4. 29-12-2010 متابعيي المفاتيح / هنا احدث المفاتيح لعائلة اللورنس usb
    بواسطة aljwal في المنتدى منتدى اللورنس Lawrence
    مشاركات: 7
    آخر مشاركة: 09-01-2011, 11:28 AM
  5. موقع خاص بالارقام السرية للرسيفرات
    بواسطة ابو سيف. في المنتدى المنتدى الفضائى العام
    مشاركات: 0
    آخر مشاركة: 17-08-2010, 02:24 AM

الكلمات الدلالية لهذا الموضوع

المفضلات

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •