how to share files from a server to your decoder

create a network share on your computer and give it a name with less than 11 characters and without any spaces.
note the ip address of the server and type it into your decoder in the server box in the following format:


[URL="**********:void(0);"][/URL]
192.168.0.1/movies
ip.address.of.server/share.name
the above would what you would put if your share is called movies on your computer and your server (computer) is located at 192.168.0.1 for an example.
click connect and the boxes will grey out and will show you the amount of free space etc on the server and other details.

If you then go to the play list and press the arrow button and select network and you can browse your computer or network attaches storage for files to/for play back/veiwing on your decoder.

You can even record or time shift to your network share if you change the settings in the record menu.

thnxxx brooo
but something wrong its not work with me
thnx again

[QUOTE=mohannad072;527552]thnxxx brooo
but something wrong its not work with me
thnx again[/QUOTE]

what's ur prob broo

i create a folder and share it
thin i put the ip address and the folder name
and nothing happened just the menu flashing and nothing going on maaan
am using windows 7

[QUOTE=mohannad072;527566]i create a folder and share it
thin i put the ip address and the folder name
and nothing happened just the menu flashing and nothing going on maaan
am using windows 7[/QUOTE]

ok man mount ur folder in pc,use cmd
[CODE]net use m: \\pc.ip.address\sharename[/CODE]

u must see successfuly message

[CENTER]إنشاء مشاركة شبكة الاتصال على جهاز الكمبيوتر الخاص بك وتعطيه اسما مع أقل من 11 حرفا ، وبدون أية مسافات.
لاحظ عنوان بروتوكول الإنترنت من خادم واكتبه في فك الترميز الخاصة بك في المربع ملقم على الشكل التالي :



192.168.0.1/movies
ip.address.of.server / share.name
وسيكون فوق ما كنت وضعت في حالة حصتك يسمى الأفلام على جهاز الكمبيوتر الخاص بك وخادم (الكمبيوتر) ويقع في 192.168.0.1 للحصول على مثال.
وسيربط فوق مربعات رمادية بها وسوف تظهر لك كمية الخ المساحة الحرة على الخادم وغيرها من التفاصيل.

اذا ذهبت بعد ذلك الى قائمة اللعب والضغط على زر السهم وتحديد شبكة ويمكنك تصفح الكمبيوتر أو شبكة الاتصال وتعلق لتخزين الملفات على / للعب مرة أخرى / veiwing على فك الترميز الخاص.

يمكنك تغيير السجل أو حتى الوقت لمشاركة شبكة الاتصال الخاصة بك إذا قمت بتغيير الإعدادات في القائمة تسجيل[/CENTER]

[quote=topgun;527589]ok man mount ur folder in pc,use cmd
[code]net use m: \\pc.ip.address\sharename[/code]u must see successfuly message[/quote]



دمت بود

[QUOTE=altayeb;527603]اخي الكريم من اجل الاعضاء ارجو منك شرح الطريقة بالعربي
انا بالنسبة الي فاهم عليك والامور تمام اشتغل عندك
بس ياريت تشرحها بالعربي طريقة عملها على وندوز 7
دمت بود[/QUOTE]
اخى الطيب ما فى فرق بين windows7 -xp نفس الطريقة
الامر السابق من start>run>cmd

[quote=topgun;527624]اخى الطيب ما فى فرق بين windows7 -xp نفس الطريقة
الامر السابق من start>run>cmd[/quote]

اخي الغالي انا اعلم تماما ماذا تكتب
والطريقة انا معك ولكن يوجد في منتدانا
ممكن لا يجودون اللغة الانجليزية
وصدقني مش مشاني من اجل الاعضاء
تحياتي لك وجهودك المبذولة مشكورة
سلفا لما تقدمة

[quote=altayeb;527629]اخي الغالي انا اعلم تماما ماذا تكتب
والطريقة انا معك ولكن يوجد في منتدانا
ممكن لا يجودون اللغة الانجليزية
وصدقني مش مشاني من اجل الاعضاء
تحياتي لك وجهودك المبذولة مشكورة
سلفا لما تقدمة[/quote]

قام الاخ ابو عوف مشكورا بالترجمة

اى احد يواجه مشكلة يمكنه الاستفسار وانشالله تحل

system error 67 occurred
the net work name cant found
this the massage i get bro
am sorry man i make it hard on u !!!!

[QUOTE=mohannad072;528302]system error 67 occurred
the net work name cant found
this the massage i get bro
am sorry man i make it hard on u !!!![/QUOTE]

No prob bro
where and how did u get this message from powersat or windows

Hi everyone.

As I saw there is a problem making a shring folder and put the correct url on the storage manager, so I would like to help and explain because I have done it before on my new Powersat device HD:

1- make folder on you PC at the root level (I mean on c:\) drive
2- share this folder and put it for everyone sharing
3- On security tab allow everyone to read, writ and edit this folder
4- On your Powersat device, put the IP address of your PC as follows:
IP address of PC/foldername
5- After pressing OK the screen will disable the url box and you are connected.

Hope this helps.

[QUOTE=ZeroJ;528349]Hi everyone.

As I saw there is a problem making a shring folder and put the correct url on the storage manager, so I would like to help and explain because I have done it before on my new Powersat device HD:

1- make folder on you PC at the root level (I mean on c:\) drive
2- share this folder and put it for everyone sharing
3- On security tab allow everyone to read, writ and edit this folder
4- On your Powersat device, put the IP address of your PC as follows:
IP address of PC/foldername
5- After pressing OK the screen will disable the url box and you are connected.

Hope this helps.[/QUOTE]
thanks for explain i hope it work correctly to other

[QUOTE=topgun;528332]No prob bro
where and how did u get this message from powersat or windows[/QUOTE]

on cmd man to mount the the folder

its solve broo
the brop was in antivruse app
its was block the connection
thnx alooooooooooot topgun
on my head brooo

[QUOTE=mohannad072;528438]its solve broo
the brop was in antivruse app
its was block the connection
thnx alooooooooooot topgun
on my head brooo[/QUOTE]

ur very wellcome

is every thing is ok now?

Ya bro its amazing but when I trying to record its says recording failed

reboot ur stb

ya mann its work thnx for ur time
and Congratulations for promotion

[QUOTE=mohannad072;529155]ya mann its work thnx for ur time
and Congratulations for promotion[/QUOTE]
on my head man:D