ALTAYEB
09-10-2010, 10:13 PM
Skystar2 SDK device for AltDVB Version 1.0.0.0
--- De******ion ---
Plug-in device Skystar 2 AltDVB (****d on Technisat SDK) with support for RAW DiSEqC,
allows you to use the card in the operating systems Windows Vista and Windows 7.
--- Claims ---
Requires:
* AltDVB version 2.2
* NOT installed BDA driver (tested on 4.6.0 only)
* Registered in the system patched DirectShow filter Sky2PCAVSrc.ax
* File skydll.dll, located in the same folder as the Sky2PCAVSrc.ax
--- Lecture in the RAW DiSEqC and Skystar 2 ---
DirectShow filter "Sky2PCAVSrc.ax" is part of the software
supplied with the card drivers, specifically - with the program "Technisat DVB-PC TV Star".
This filter allows the use of maps to create their own programs
to view satellite television. Besides the basic functions of this module is built
support for direct sending RAW DiSEqC commands (that is, any team DiSEqC 1.1 and 1.2).
However, the real support for RAW DiSEqC realized only with the card verification, ie,
on those maps where DiSEqC 1.2 OFFICIALLY does not work, where he officially does not work.
All of these were zamorochki there will be an official module Sky2PCAVSrc.ax.
--- Addressing RAW DiSEqC and Skystar 2 ---
To RAW DiSEqC still earned on your beloved Skystar 2,
must register in the system patched Sky2PCAVSrc.ax. This filter
found in this archive in your "Raw DiSEqC support".
Registration is via the file "reg.cmd".
--- Working with AltDVB ---
When you start AltDVB, you must select the appropriate device to support RAW DiSEqC.
If you believe that RAW DiSEqC anyway does not work, try setting
repeat option packages DiSEqC commands equal to two or more, and do not forget
set the interval between sending (100-200 milliseconds - to taste).
If your card is overclocked and can easily demux the entire traffic flow
at high speeds, for the sake of the experiment, you can choose from a post****** Full TS.
In this mode, stable operation is not guaranteed, and plus, in principle, no no,
except that in AltDVB become active function TS Analyzer.
--- De******ion ---
Plug-in device Skystar 2 AltDVB (****d on Technisat SDK) with support for RAW DiSEqC,
allows you to use the card in the operating systems Windows Vista and Windows 7.
--- Claims ---
Requires:
* AltDVB version 2.2
* NOT installed BDA driver (tested on 4.6.0 only)
* Registered in the system patched DirectShow filter Sky2PCAVSrc.ax
* File skydll.dll, located in the same folder as the Sky2PCAVSrc.ax
--- Lecture in the RAW DiSEqC and Skystar 2 ---
DirectShow filter "Sky2PCAVSrc.ax" is part of the software
supplied with the card drivers, specifically - with the program "Technisat DVB-PC TV Star".
This filter allows the use of maps to create their own programs
to view satellite television. Besides the basic functions of this module is built
support for direct sending RAW DiSEqC commands (that is, any team DiSEqC 1.1 and 1.2).
However, the real support for RAW DiSEqC realized only with the card verification, ie,
on those maps where DiSEqC 1.2 OFFICIALLY does not work, where he officially does not work.
All of these were zamorochki there will be an official module Sky2PCAVSrc.ax.
--- Addressing RAW DiSEqC and Skystar 2 ---
To RAW DiSEqC still earned on your beloved Skystar 2,
must register in the system patched Sky2PCAVSrc.ax. This filter
found in this archive in your "Raw DiSEqC support".
Registration is via the file "reg.cmd".
--- Working with AltDVB ---
When you start AltDVB, you must select the appropriate device to support RAW DiSEqC.
If you believe that RAW DiSEqC anyway does not work, try setting
repeat option packages DiSEqC commands equal to two or more, and do not forget
set the interval between sending (100-200 milliseconds - to taste).
If your card is overclocked and can easily demux the entire traffic flow
at high speeds, for the sake of the experiment, you can choose from a post****** Full TS.
In this mode, stable operation is not guaranteed, and plus, in principle, no no,
except that in AltDVB become active function TS Analyzer.