ghamdan
20-09-2010, 01:38 PM
Ø Mc@s : ND* card reading improved.
Ø Home Sh@ring: freezing problem fixed.
Follow the process as described below;
<Plugin downloading>
* This plugin (plugin_16SEP2010) can be working only with IRD version s/w v.1.08.37 or later.
So, you need to download the IRD v.1.08.37 version s/w before downloading plugin.
1. Unzip plugin_ddmmmyyyy.zip.
2. Copy "plugin" folder to a USB storage.
The folder name should be "plugin" without change, otherwise the PVR cannot recognize it.
3. Connect the USB storage to the PVR during Live Watching.
4. When download pop-up window appears, please find "plugin" folder with Right/Left button of RCU.
5. Download the "plugin" to the PVR.
6. Download completes, the PVR will be rebooted automatically.
<plugin Menu>
Go to Menu > Utilities > PlugIn, you can see the menu as below;
1. MCAS (Multi CAS, Univiersal CAS)
: you can set the State of Mcas "started/null", and set Start Type "Manual/Auto".
If you set Start Type to "Auto" and set State to "started", MCAS will start automatically when the PVR turns on.
If you set Start Type to "Manual", you can start/stop it manually in that menu.
2. Keditor (Key editor) : you can edit key.
3. Xcamclient: you can set the State of C/S "started/null", and set Start Type "Manual/Auto".
If you set Start Type to "Auto"and set State to "started", C/S will start automatically when the PVR turns on.
If you set Start Type to "Manual", you can start/stop it manually in that menu.
After input and edit C/S information via Xcam******ure, you can start it by Xcamclient "started"
4. Xcam******ure: you can input and edit c/s information.
Once you input server URL, it will be displayed as ***** for protection, and you can see it by pressing 1407.
5. ExSIM: You can connect external modules which is using twin protocol, Y4, KNJ... (start > OK button > Set the module)
Satellite module "A" is for twin protocol and Satellite module "B" is for Y4.
Ethernet module is for KNJ.
6. Kain2r: This is s/w module for KNJ, you can use it just like cc***.
1. Select Kain2r.
2. Start it with Green button.
3. After Started, press OK button.
4. Pop-up menu will appear.
5. Select <registration> at the bottom of the Pop-up menu.
6. Select Server Address and press 1407.
7. Input www.dragonlink.biz and press enter in the on-screen keyboard.
8. Go to Registration Key and input 25digit key, and press enter in the on-screen keyboard.
9. Status: "Connecting > Conneted to the server / expire date" will be shown.
10. Go to the live channel (pls. refer to the channel list)
The key is safe even after factory reset, and one 25digit key can be used in only one PVR.
7. Mgcamd: Mgcamd is a separated solution, and C/S information cannot input in Xcam******ure.
C/S information for Mgcamd should be editted and input into plugin > keys > newcamd.
In the newcamd file, you can see the examples for how to input C/S information.
* You can set all the menus "Started" at the same time except Mgcamd.
When Mgcamd is "Started" to use, all other menus should be "Stop".
------------------------
<Home Network Sharing>
You can use Home Network Sharing from this plugin with Mcas and Mclient.
Both Server and Client receiver need to be connected by internet.
Server receiver and client receiver have to have the same Gate way address to share card key data within Home Network.
Mcas - server side
1. make started by Green button and then press OK button
2. you will see ،®smart card 2،¯ and ،®server setting،¯ menu if your receiver has smart card inside
3. enter ،®server setting،¯ menu by press OK
4.،®port،¯ : don،¯t need to change port and it is better to leave as default, but you can change it as 5 digits if you need and it is safe.
5.،®user setting،¯ : you can input user id and password to allow connecting to server receiver from client which is listed inside user setting menu.
6.،®auto start،¯ : you can change as ،®on،¯ if you want to start this server menu when you start Mcas plugin
7. login confirmation : you can change as ،®on،¯ if you want to check user id and password from client receiver
Mclient - client side
1. make started by Green button and then press OK button
2. there is a input space for server address (IP address of server receiver), port, user id, password
3. To edit server address, you need to press your own master key (1407 if there is no change) then input the IP address of server receiver (no need //)
4. lastly, go to the ،®connect to server،¯ and press ،®OK،¯ button
من يستعمل ام جى كامد يضع السطر الجديد او يشطب ملف الكىز
(المفاتيح)
Ø Home Sh@ring: freezing problem fixed.
Follow the process as described below;
<Plugin downloading>
* This plugin (plugin_16SEP2010) can be working only with IRD version s/w v.1.08.37 or later.
So, you need to download the IRD v.1.08.37 version s/w before downloading plugin.
1. Unzip plugin_ddmmmyyyy.zip.
2. Copy "plugin" folder to a USB storage.
The folder name should be "plugin" without change, otherwise the PVR cannot recognize it.
3. Connect the USB storage to the PVR during Live Watching.
4. When download pop-up window appears, please find "plugin" folder with Right/Left button of RCU.
5. Download the "plugin" to the PVR.
6. Download completes, the PVR will be rebooted automatically.
<plugin Menu>
Go to Menu > Utilities > PlugIn, you can see the menu as below;
1. MCAS (Multi CAS, Univiersal CAS)
: you can set the State of Mcas "started/null", and set Start Type "Manual/Auto".
If you set Start Type to "Auto" and set State to "started", MCAS will start automatically when the PVR turns on.
If you set Start Type to "Manual", you can start/stop it manually in that menu.
2. Keditor (Key editor) : you can edit key.
3. Xcamclient: you can set the State of C/S "started/null", and set Start Type "Manual/Auto".
If you set Start Type to "Auto"and set State to "started", C/S will start automatically when the PVR turns on.
If you set Start Type to "Manual", you can start/stop it manually in that menu.
After input and edit C/S information via Xcam******ure, you can start it by Xcamclient "started"
4. Xcam******ure: you can input and edit c/s information.
Once you input server URL, it will be displayed as ***** for protection, and you can see it by pressing 1407.
5. ExSIM: You can connect external modules which is using twin protocol, Y4, KNJ... (start > OK button > Set the module)
Satellite module "A" is for twin protocol and Satellite module "B" is for Y4.
Ethernet module is for KNJ.
6. Kain2r: This is s/w module for KNJ, you can use it just like cc***.
1. Select Kain2r.
2. Start it with Green button.
3. After Started, press OK button.
4. Pop-up menu will appear.
5. Select <registration> at the bottom of the Pop-up menu.
6. Select Server Address and press 1407.
7. Input www.dragonlink.biz and press enter in the on-screen keyboard.
8. Go to Registration Key and input 25digit key, and press enter in the on-screen keyboard.
9. Status: "Connecting > Conneted to the server / expire date" will be shown.
10. Go to the live channel (pls. refer to the channel list)
The key is safe even after factory reset, and one 25digit key can be used in only one PVR.
7. Mgcamd: Mgcamd is a separated solution, and C/S information cannot input in Xcam******ure.
C/S information for Mgcamd should be editted and input into plugin > keys > newcamd.
In the newcamd file, you can see the examples for how to input C/S information.
* You can set all the menus "Started" at the same time except Mgcamd.
When Mgcamd is "Started" to use, all other menus should be "Stop".
------------------------
<Home Network Sharing>
You can use Home Network Sharing from this plugin with Mcas and Mclient.
Both Server and Client receiver need to be connected by internet.
Server receiver and client receiver have to have the same Gate way address to share card key data within Home Network.
Mcas - server side
1. make started by Green button and then press OK button
2. you will see ،®smart card 2،¯ and ،®server setting،¯ menu if your receiver has smart card inside
3. enter ،®server setting،¯ menu by press OK
4.،®port،¯ : don،¯t need to change port and it is better to leave as default, but you can change it as 5 digits if you need and it is safe.
5.،®user setting،¯ : you can input user id and password to allow connecting to server receiver from client which is listed inside user setting menu.
6.،®auto start،¯ : you can change as ،®on،¯ if you want to start this server menu when you start Mcas plugin
7. login confirmation : you can change as ،®on،¯ if you want to check user id and password from client receiver
Mclient - client side
1. make started by Green button and then press OK button
2. there is a input space for server address (IP address of server receiver), port, user id, password
3. To edit server address, you need to press your own master key (1407 if there is no change) then input the IP address of server receiver (no need //)
4. lastly, go to the ،®connect to server،¯ and press ،®OK،¯ button
من يستعمل ام جى كامد يضع السطر الجديد او يشطب ملف الكىز
(المفاتيح)