Sky X, Sky X5.
* * After Power Failure Press 6969 + 6969 (This option also open scramble channel).
* * Press 8280 to insert manually BISS keys.
* * Press 8282 to insert KEYS manually (Seca, Viaccess, Irdeto, Nagravision, Conax).
* * Press 8282 ->Press Blue Button on Remote, New window will appear on the screen.
This Option will allow you to watch some of TPS package while the others no,
(This is very usefull when TPS were Black-Out),
Do this:
Point to a scramble channel eg: France 2 -> press 8282 ->Press Blue Button ->Move up/down ->Point to ID 007800 or 007c000 or 015000 or 021100 or What ever ID works with then press OK ->YES -> OK to save ->Exit.
At this time France 2 should work again on your TV.
Do as above to the others channel.
(Regarding to this option SOON WILL BE RELEASE more info on ID's).
Humax. (5400 / 5400z)
* * After downloading the new firmware still some channel are scramble,
Do this:
Switch ON The Receiver ->Remove Card ->Remove Cas ->Point to Scramble Channel
(eg: SRG) -> Download the Bin Key File with the latest SRG keys -> Switch OFF ->
Insert Cas -> Insert Card ->Switch ON.
And now SRG channel should be OK.
Fortecstar.
If you can't get to the Menu Screen, Do this: Turn Off & On The Receiver from the Back.
Just after the ---- Click on Menu. The menu should be appear again on your tv screen.
How To Enter The Keys For Lifetime Ultra.
* * Click MENU on the remote
* * Then Right Arrow to CHANNEL EDIT
* * Then Arrow down to CODE then OK then 1668 or 1010 what ever works.
* * Then Right Arrow to turn code OFF just to be safe.
* * Then Arrow down to eg: NAGRAVISION then OK
* * Then side Arrow to eg: DISH NETWORK
* * You need to change the keys on Two Lines.
* * In PROVIDER ID it will be 00 01 so you do NOT need to change this line.
* * Then Down Arrow to KEY NUMBER change here 00 or 01
* * Then Down Arrow again to KEY, change here XX XX XX XX XX XX XX XX
* * Then OK to Save. Then EXIT Once
* * Then Right Arrow Once, then enter 1668 to turn code back ON.
Make sure your KEYCODE FUNCTION is ON.
Your TV should work now after you Exit Out.
If your TV don't work after the above this mean you have another problems.
Make sure the Dish Cable on your Receiver is at the IF Connector NOT the ANT.
There are Two Kinds of Remote's that I know of.
Here is where the letters are on both remote's.
* A - SAT
* B - INFO or i
* C - TV/RADIO
* D - PAUSE
* E - AUDIO or ?
* F - GUIDE or EPG
If the keys will not stay or come out reversed, Do this: Put the keys in again, and
How To Set The Default Key
Click on MENU then go to CHANNEL EDIT then CODE then OK
Put in 1010 or 1668 what ever it works, then down Arrow to SET DEFAULT KEY and click OK then Exit Out.
Re: HOW to check original firmware on KAON (230) Receiver
Check original firm on Kaon 230
Go to keys menu press yellow, blue, green, menu and then yellow to initialize the keys.
If it's yellow this mean you still have the original firmware !
SRT3620 & 3630
To Edit the code key press the number 8282.
Enter the code 6969 two times each time coming from main power OFF/ON and the unit will open the scrambled channels.
TO EDIT PROVIDER ID OR ADD NEW KEY
PRESS MENU GO TO INSTALLATION/INFORMATION then
PRESS "FUNC"KEY 4 TIMES.
TO RESET OR INITIALIZE THE KEY CODE OF
PRESS "MENU" then
GO TO "SYSTEM INFORMATION"
PRESS "FUNC" KEY 4 TIMES then
PRESS "0"
13-06-2006, 09:20 AM
ghamdan
How to enter new key to DragonCam (by remote control)
1. Find the key (eg: A9 04 F4 FF A3 AF FA 5B 5C A7 51 BF 5A 35 D0 C0)
2). Transform it into Dragon recognazible numbers:
3). Open DragonCAM menu... enter debug.. enter Viaccess ... enter Viaccess1
4). Find provider 55AEAE (default first)
5). Enter it and change the 08x-09x key
6). When asked for 08-0 enter 169 004 244 255 163 175 250 091
7). When asked for 08-1 enter 092 167 081 191 090 053 208 192
That's it.. you're ready for MultiVision... HAVE FUN!!!!!!
How To Enter Tps Aes Key To Humax5400z
Tps Aes Key (for example recent aes key-26-11-2005):
ED 40 3D 80 75 A7 1D 91 0E 59 89 7B 2B B4 DC 63
Goto
1-menu
2-toh--right Button
3-parser
4-ram Editor
5-GREEN Button For Viaccess
6-down Button For Going To Provider Line
7-use Right Button Find 007c000 Tps Provider
8-go To 03 Key Line With Down Button
9-enter First 8x2 Key From Tps Aes Key Like This
03: ED 40 3D 80 75 A7 1D 91
To Do This
Use Number Buttons 0-9
Mute Button = A
Red Button = B
Green Button = C
Yellow Button = D
Blue Button = E
White Button = F
You Can Also Use Up Down Buttons To Change The Keys
Enter This To 03 Key Line ED 40 3D 80 75 A7 1D 91
10-then Go To Key Line 13 With Right Button
11-enter Second 8x2 Key This 0E 59 89 7B 2B B4 DC 63
That it Your Tps Aes Key Will Be Updated,
Good luck!!
13-06-2006, 09:21 AM
ghamdan
how to enter keys in manhatten patched recievers
-------------------------------------------------
on remote press menu,
then-red-green-yellow-blue-ok.
the hidden menu will open.
with the blue button you change the cas settings
ie:irdeto-seca-via-nagra.you set to the system for the keys.
----------------------------------------------------------
for nagra you will see,this board.
**** ** ****************
**** ** ****************
you enter the ident followed by the keys.
ie: 3d01-- 00-- fa-1e-93-35-3a-a8-1f-4a
3d01-- 01-- 30-9b-96-0b-a7-55-39-f4
after you enter the keys use the green button to store
then exit the menu and the chns:will open
use this method for all systems,you find the ident with the keys.
the other systems use the ident with one row of keys.
this will give
Upgrading Dragon cam with Dragon PC Loader
1. First of all start the Dragon PC Loader 3.3 (DRCP Loader).
2. Then "Open" button select any Predator file. Or with "download" button you can download automaticaly from internet.
3. Be sure your reciever is on a FTA channel.
4. Insert Dragon PC Loader card into Dragon cam (Contact or chip to be UP). connect commport to Dragon PC Loader with serial lead 1:1 and Cam together with loader insert to receiver.
5. After this go to conditional access of reciever and select predator x.xx "dragon loader" and press ok.
6. Select "Yes load module" and wait utill upgrade finish.
7. Remove card and restart your receiver (off and on).
5-Hit 6969 Twice
How to enter the key in Kaon receiver
* First
Disconnect the receiver from the power supply at least for 1 (one) minute,
Then Reconnect to the power supply again,
* Then
When picture appears on screen,
Press Yellow, Blue, Green, and Menu button
*Remember
You have to do it quickly, don't leave an interval between pressing each button.
After that the key list will open
and you can change the keys by pressing volume button left & right.
13-06-2006, 09:22 AM
ghamdan
HOW To Actived Receiver Code MENU
**TECNOSAT 2000 ULTRA
Press MENU then Press 5400
**SUPERMAX 9100
Press MENU then Press 7799
--------------------------------------------------------------------------------
STARSAT
How To Backup Channels
Before you uploaded the update, do the following to save your channel list
Press MENU
Go to SETUP
Go to SYSTEM BACKUP
now upload the new software
After booting, if asked, choose the language, and
Go to MENU
Go to SETUP
Go to SYSTEM RESTORE
Your list of channels will be restored as it was.
13-06-2006, 09:23 AM
ghamdan
How to enter Biss Key for SKY X Receiver:
1).Open the NBA channel
2).Press 8280
3).Enter this numbers in Row No.1 :18AA0000C2D328BD
4).Exit & Save.
For others channel enter the Biss Keys in ROW 2 and so on.
eg:
Row No.1 18 AA 00 00 C2 D3 28 BD 00 00 00 00 00 00 00 00 => NBA (16 Digit)
Row No.2 AB CD EF 67 FE DC BA 94 00 00 00 00 00 00 00 00 => Megasport (16 Digit)
Row No.3
|
|
Row No.20
[url]www.jo1sat.com[/url]
بعد تنزيل السوفتوير لجهاز الاوبن ستار موديل GS-1690 يلزمك ادخال رقمين لتفعيل ميزة الفتح بالرسيفر.. وهي كالتالي:
ضع على اي قناة مشفرة, وعند ظهور كلمة Scrambled Channels قم بالضغط على:
EXIT>> 6108
سينطفئ الجهاز ويعمل مرة أخرى, وعندها أيضا سوف تظهر لك كلمة Scrambled Channels , وعندها أدخل:
EXIT>> 8088
وبعدها سينطفئ الجهاز ويعمل مرة أخرى. وعندها ستفتح كل القنوات, وستظهر لك قائمة تعديل الكودات (EDIT CODE)
أما بالنسبه لطريقة تفعيل اجهزة ال 7000 وال 1990 (+) ,, فهي كالتالي :
طريقة التفعيل :
تأكد من تنزيل السوفتوير بشكل صحيح ..
لتفعيل القنوات ...
لأول مره فقط ..
اذهب الى القائمة وأدخل الرقم 8888
ثم اضغط على القائمه مره اخرى ,, واضغط على الكبسه الزرقاء في الرموت لكي تظهر لك صفحة الكودات ..
ومن ثم
menu,press "5-7-9-6" والانتظار على القناة 1 دقيقه بس !!
لالغاء خاصيه فتح القنوات المشفره ..
كرر نفس العمليه لكن بوضع 0000 ... وحينها سوف يتوقف الجهاز عن تفعيل ومشاهدة القنوات المشفره !!
Please make sure model no is correct before upgrade
Please use this version to upgrade which fix multivision problem.
connect the receiver and computer with RS232 straight calbe
double clcik to open "stbv2"
from menu to click open file icon, open the file:v??.cus
turn on the receiver, it will start to fuse software into flash memory
wait untill receiver reboot
For new receiver after upgrade, Please operate from remote as follows:
Press MENU button,then press 8888
Press MENU button, BLUE button
Close this function, Please operate from remote as follows:
ASTROVOX AND MIRCO-X MASTER CODES AND CODE ACTIVATION
MDR-4000 FTA
Master Password>>>>>>1250
Code Activation >>>>>>>>>>Automatically after loading the S/W.
VSR-2500 FTA
Master Password>>>>>>1250
Code Activation >>>>>>>>>>Automatically after loading the S/W.
VSR-2600 FTA PLUS
Master Password>>>>>>1004
Code Activation >>>>Menu – Language Setting – Ok – Red Button followed by "9999" – Go and enable Emulation – Red Button to save.
MDR-2800 FTA
Master Password>>>>>>1004
Code Activation >>>>Menu – Language Setting – Ok – Red Button followed by "8888" – Go and enable Emulation – Red Button to save.
MDR-6000 IR
Master Password>>>>>>1004
Code Activation >>>>Menu – Language Setting – Ok – Red Button followed by "8888" – Go and enable Emulation – Red Button to save.
MDR-6500 IRCI
Master Password>>>>>>1004
Code Activation >>>>Menu – Language Setting – Ok – Red Button followed by "8888" – Go and enable Emulation – Red Button to save.
VSR-250 FTA
Master Password>>>>>>RELOAD S/W
Code Activation >>>>Blue button followed by "0000"on any channel.
MDR-4500 FTA
Master Password>>>>>>8175
Code Activation >>>>Menu – Parental Control – Enter 3453 then press Menu to exit.
VSR-2600 FTA
Master Password>>>>>>1668
Code Activation >>>>Menu – Parental Control – Second Pin Enter 1668 – Switch On.
VSR-3000 CI
Master Password>>>>>>1250
Code Activation >>>>Automatically after loading the S/W..
VSR-4550 MR
Master Password>>>>>>1668
Code Activation >>>>Automatically after loading the Matrix S/W.
VSR-4500 2CI
Master Password>>>>>>1668
Code Activation >>>>Automatically after loading the Penta S/W.
VSR-4600 2CI
Master Password>>>>>>1668
Code Activation >>>>Automatically after loading the Matrix S/W.
VSR-7000 CX
Master Password>>>>>>1668
Code Activation >>>>Automatically after loading the S/W..
18-06-2006, 02:26 PM
ghamdan
beausat 6310
وهذه هى طريقه تفعيل الشفره
بعد تحميل السوفت
اقف على اللغه و اكتب 2003
ثم سهم يمين و اضغط على الزر الاصفر ثم ok